registrar@vssut.ac.in +91 8480441756

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

profile

Dr. Pankaj Charan Jena

Associate Professor

Qualification : B.E. in Mechanical Engineering, BPUT, Odisha; M.Tech. in Mechanical Engineering (Mechanical System Design),BPUT, Odisha; PhD. in Engineering, Dept. of Mechanical Engineering, Jadavpur University, Kolkata.

Specialization : Mechanical System Design.

+91 8249268068 pcjena_pe@vssut.ac.in

B.E. in Mechanical Engineering, BPUT, Odisha; M.Tech. in Mechanical Engineering (Mechanical System Design),BPUT, Odisha; PhD. in Engineering, Dept. of Mechanical Engineering, Jadavpur University, Kolkata.

Mechanical System Design.

Since 2003 (Teaching, Research and Extension)

Graduate Level : Engineering Mechanics, Design of Machine Elements/Components, Mechanical Vibration, Mechanical Measurements, Mechanics of Composite Materials, Robotics & Robot Applications, Finite Element Methods in Manufacturing, Rapid in Manufacturing System, Mechatronics, Universal Human Values.
Post Graduate Level : Mechanics of Composite Materials, Finite Element Methods, Applied Elasticity, Fuzzy Logic, Rapid in Manufacturing System, Finite Element Analysis in Manufacturing, Robotics & Robot Applications, Mechanical Vibration, Advanced Material Processing and Characterization

Mechanics of Composite Materials, Composite fabrication Techniques, Advanced Materials Processing & Characterization, Beam/Plate Theory, Dynamics of Mechanical System, Crack Analysis, Condition Monitoring of Beam/Plate Structures, Buckling Analysis, Fatigue Analysis, Artificial Intelligence Techniques, (Fuzzy Logic, Neural Network), Robotics & Automatic Vehicle Dynamics, Solar Powered Vehicle.

Ph. D. Candidates : 02 No. (Awarded), 03 Nos( ongoing)
  1. Mr. Sarada Prasad Parida, Reg. No. 1810110007 - Higher Order Shear Deformation Plate Theory Applied to Study the Dynamic Behavior of Composite Plate (Awarded on 21-09-2022, Reference VSSUT/PGSR/942/22 & DATE 22-09-2022)
  2. Ms. Saritprava Sahoo, Regd. No. 180110004 - Multi-Crack Detection in Hybrid Composite Beam using Vibration Parameters and AI Techniques(Awarded on 12-01-2024, Reference VSSUT/PGSR/227/24 & DATE 02-02-2024)
  3. Mr. Sitesh Mahapatra, Reg. No. 2010110105 - Machinability investigation of die steel in hard turning under minimum quantity lubrication-cooling strategy (Ongoing)
  4. Mr. Debasish Mishra, Reg. No. 2310110003 - Damage Propagation in Laminated Structure (Ongoing)
  5. Mr. Rajiv Lochan Padhy, Reg. No.2310110102 - Damage analysis of laminated composite plate subjected to various impact load in a viscous medium (Ongoing)
M. Tech. Candidates : Total 32 Nos. (24 No. Scholars completed their Thesis in the past institutions and 8 No. Scholars Completed at VSSUT, Burla)
  1. Mr. Saurav Kumar Bhatt - Kinematics and Dynamics analysis of six-wheels two mode operation Rocker-Bogie
  2. Mr. Binay Kumar Lohar - Experimental Analysis and Optimization of Turning operation on FG Specimen
  3. Ms. Sarmila Singh - Design and Fabrication of Functionally Graded Natural Fiber/ Epoxy Hollow Cylinder Using Centrifugal Casting
  4. Mr. Pranav Kumar Saraswati - Fabrication, Characterization and Machining of Natural Fiber Reinforced Hybrid Composite with Filler (Fly-ash/Graphene)
  5. Ms. Barsha Rani Pradhan - Experimental investigation and numerical analysis of electrochemical micro machining process using ANSYS-CFX
  6. Mr. Saroj Kumar Parida - Experimental and numerical analysis of Al-Cu sheets using hydraulic bulging process
  1. Excellence Teaching in Higher Education Award: (Faculty Award) received for the futuristic and outstanding best practices in the field of education - (Faculty Award) received for the futuristic and outstanding best practices in the field of education - 2020 - DK International Research Foundation, 2020.
  2. Certificate of recognition for Top 100 International Distinguished Researchers 2020 - For Research work publication in reputed journals - 2020 - Green ThinkerZ
  3. Best Paper award - Dynamic analysis of Cracked FGM cantilever beam - 17-18, May 2019 - International conference on Innovative product design and intelligent Manufacturing systems, NIT, Rourkela
  4. Er. Pratap Chandra Panda award received from The Institution of Engineers (India), 2019. - Research Paper entitled: Predictive modelling and parametric optimization of surface roughness for economical feasibility study of coated ceramic tool in hard turning process - 30th March 2019 - During the 60th Annual Technical Session, Odisha Section,The Institution of Engineers (India), 2019.
  1. Life member, ISTE, New Delhi, India.
  2. Member of Institution of Engineers and Chartered Engineer, Institution of Engineers- Kolkata, India.
  3. Member of Robotics society-IIT Kanpur, India.
  1. Real-time Contamination (Metallic and Non-metallic) Detection in Water Body and Wetland of Hirakud Dam” by PI(s) Dr. Arunanshu Mahapatro, and Dr. Pankaj Charan Jena, VSSUT, Burla. Funding Amount Rs. 20, 000, 00.00 from TIH-IIT Guwahati, Duration 2025-2027
  2. OURIIP -2022 Grant, Department of Higher Education, Govt. of Odisha, Rs.6,78,000. Duration 2023-2025

International Publications

  1. Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y
  2. Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589
  3. Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020
  4. Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161
  5. Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415
  6. Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2
  7. Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1
  8. Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034
  9. Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8
  10. Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615
  11. Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88
  12. Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095
  13. Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762
  14. Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095
  15. Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762
  16. Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.
  17. Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.
  18. Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.
  19. Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS
  20. Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1–27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.
  21. Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.
  22. Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.
  23. Sarada Prasad Parida, Pankaj Charan Jena*, “Advances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overview”, Mechanics of Composite Materials, Vol. 56, No. 4, 455–484, 2020. SCIE-IF: 1.33.
  24. Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, “Characterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Casting”, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.
  25. Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, “Dynamic Investigation of FRP Cracked Beam Using Neural Network Technique”, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647–661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.
  26. Sarada Prasad Parida, Pankaj Charan Jena, “Design and Finite Element analysis of Thick walled Laminated Composite Pressure Vessel”, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.
  27. Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, “Dynamic analysis of laminated composite beam using Timoshenko beam Theory”,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 – 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.
  28. Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, “Buckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinder”, International Journal of Engineering and Advanced Technology ISSN: 2249 – 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.
  29. Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, “Fabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)”, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.
  30. Pankaj Charan Jena, “Mechanical Properties of Fabricated CFRP with Filler”, International Journal of Engineering and Advanced Technology ISSN: 2249–8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.
  31. S. Kayal, RabindraBehera, Pankaj Charan Jena, “Solidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Composites”, International Journal of Engineering and Advanced Technology ISSN: 2249 – 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.
  32. Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, “Fault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientation”, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889
  33. Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, “Dynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibres”, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194
  34. Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, “Theoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvatures”, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS
  35. Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.
  36. Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.
  37. Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.
  38. Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.
  39. Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.
  40. Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.
  41. Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

International Conferences

  1. Parida SP, Jena PC., Cracked functionally graded beam's effects on vibration characteristics, Vol 1, Laxmi Publication, ISBN-978-1-387-30514-8. 1st International Conference Technology & Transformation in Mechanical Engineering, 6-7, January 2023, AIET, Bhubaneswar.
  2. Parida SP, Jena PC. Dash RR, Transverse Vibration of Laminated-Composite-Plates with Fillers under Moving Mass Using HSDT, 3rd Innovative Product Design and Intelligent Manufacturing systems: national Conference (IPDIMS 2021), NIT, Rourkela.
  3. Saritprava Sahoo, Pankaj Charan Jena, (2021), Damage Detection Using Recurrent Neural Network in Hybrid Composite Beam”,.2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021)
  4. Parida SP, Jena PC. A simplified fifth-order shear deformation theory applied to study the dynamic behavior of moderately thick composite plate, 2nd Innovative Product Design and Intelligent Manufacturing systems: national Conference (IPDIMS 2020), NIT, Rourkela
  5. Sarada Prasad Parida, Pankaj Charan Jena, (2020), Preparation of Epoxy-Glass Composites with Graphene and Flyash filler, Materials Today Proceedings, Volume 26, Part 2, 2020, Pages 2328-2332, https://doi.org/10.1016/j.matpr.2020.02.501, 10TH- International Conference on Materials Processing and Characterization -2020, GRIET, Hyderabad, SCOPUS
  6. Saritprava Sahoo, Pankaj Charan Jena, (2020), Fabrication and Characterized of Hybrid Composite Beam Material with Fillers, Volume 26, Part 2, 2020, Pages 2595-2600, https://doi.org/10.1016/j.matpr.2020.02.549, 10TH- International Conference on Materials Processing and Characterization -2020, GRIET, Hyderabad, SCOPUS
  7. Pradipta Kumar Rout, B. Surekha, Pankaj Charan Jena, Girija N Arko, (2020), Experimental Studies on Aluminum Powder Mixed Electro Discharge Machining of Ultra-Light Weight Mg-6Al Alloy, 10TH- International Conference on Materials Processing and Characterization -2020, GRIET, Hyderabad, SCOPUS
  8. Sarada Prasad Parida, Pankaj Charan Jena, (2019), An Overview: Different Manufacturing Techniques used for Fabricating Functionally Graded Material, Journal of Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2942-2951 ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2019.07.164, 9TH- International Conference on Materials Processing and Characterization-2018, GRIET, Hyderabad, SCOPUS
  9. Sarada Prasad Parida, Pankaj Charan Jena, R. R. Dash, (2019), FGM Beam analysis in Dynamical and Thermal surroundings using Finite Element Method, Journal of Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 3676-3682, ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2019.07.301 9TH- International Conference on Materials Processing and Characterization-2018, GRIET, Hyderabad, SCOPUS
  10. Pankaj Charan Jena, (2018), Fault Assessment of FRC Cracked Beam by using Neuro-Fuzzy Hybrid Technique, Journal of Materials Today: Proceedings, Volume 5, Issue 9, Part 3, 19216-19223, ISSN: 2214-7853, 8TH- International Conference on Materials Processing and Characterization-2018, GRIET, Hyderabad, SCOPUS
  11. Pankaj Charan Jena, S. P. Parida and R. R. Dash, (2018), Modal study of trapezoidal cantilever plate-like composite beam, Journal of Materials Today: Proceedings, Volume 5, Issue 9, Part 3, 19680-19692, ISSN 2214-7853, 8TH- International Conference on Materials Processing and Characterization -2018, GRIET, Hyderabad, SCOPUS
  12. Pankaj Charan Jena, (2018), Identification of Crack in SiC Composite Polymer Beam Using Vibration Signature, Journal of Materials Today: Proceedings, Volume 5, Issue 9, Part 3, 19693-19702, ISSN 2214-7853, 8TH- International Conference on Materials Processing and Characterization-2018, GRIET, Hyderabad, SCOPUS
  13. Pankaj Charan Jena, (2017), Free Vibration Analysis of Short Bamboo Fiber based Polymer Composite Beam Structure, Journal of Materials Today: Proceedings, Vol. 5 (2.1), 5870-5875, ISSN 2214-7853, 7TH- International Conference on Materials Processing and Characterization -2017, GRIET, Hyderabad, SCOPUS
  14. J. Jena, A. Panda, A.K. Behera, P.C. Jena, S.R. Das, D. Dhupal, “Modelling and optimization of surface roughness in hard turning of AISI 4340 steel with the coated ceramic tool”, International Conference on Energy, Materials and Information Technology, 23rd - 24th December 2017, Amity University, Ranchi.
  15. P.C. Jena, S.R. Das, “A review on machinability of hardened steels with hard turning process: Parametric analysis”, International Conference on Sustainable Energy & Environment Vis-à-vis Advanced Materials (ENMAT-II)”, 4th-5th March 2016, Orissa Engineering College, Bhubaneswar.
  16. Jena, Pankaj C., Parhi, Dayal R., Pohit, G. and Samal, B.P, (2015), Crack Assessment by FEM of AMMC Beam Produced by Modified Stir Casting Method, Journal of Materials Today: Proceedings, 2267 - 2276, ISSN 2214-7853, 4th International Conference on Materials Processing and Characterization, 2015, GRIET, Hyderabad, SCOPUS
  17. Jena, Pankaj C., Parhi, Dayal R. and Pohit, G, (2014), Fault analysis of FRC beam by using Neuro-Fuzzy Hybrid Technique, Proceedings- ICNDME, 415-421, Dec.2014, International Conference on Newest Drifts in Mechanical Engineering-2014, M.M. University, Ambala.
  18. Jena, Shakti P., Parhi, Dayal R. and Jena, Pankaj C., (2014), Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research in Engineering (IJTRE) 2(7), 860-865, 2015, ISSN-2347-4718.International Conference on Newest Drifts in Mechanical Engineering-2014, M.M. University, Ambala

Workshops

  1. 1. Coordinator, One-week, AICTE Sponsored STTP under AQIS Scheme on Advance of Materials Design, Machining, and Characterization (AMDMC-2020), VSSUT, Burla 21st – 26th November 2020.
  2. Coordinator, one-week, TEQIP-III, Government of India Sponsored Faculty Development Programme on Advances in Materials & Machining processes for Recent Industrial Applications (AMMPRIA-2020) VSSUT, Burla 7th– 11th September 2020.
  3. Coordinator, Two-week Short-term course on “Functional Engineering Material: Technology, Modeling, and Analysis (FEMTMA)”, AICTE- QIP-STC, VSSUT, Burla, 25th June to 7th July 2018.
  4. Convener, ENMAT-II (04.03.2016-05.03.2016) Orissa Engineering College, Bhubaneswar
  1. A patent awarded on entitled: An autonomous floor cleaning Robot : Application No. 202131023229A/ Date of publication: 18-06-2021 The Patent Office Journal No. 25/2021 : Date of publication: 05-02-2021 : The Patent Office, Govt. of India
  2. A patent awarded on entitled: Fluidized hot chamber for abrasive jet machining : Application No. 20203105334A/ Date of publication: 05-02-2021 : Date of publication: 05-02-2021 : The Patent Office, Govt. of India
  3. A design patent awarded on entitled: Apparatus for Testing Structural Damage in Laminated Composite Plates Dated 22-03-2024 : Awarded No. 161541/ Date of publication: 22-03-2024 :The Patent Office, Govt. of India
  4. A patent published on entitled: Apparatus and Method for Assessing Structural Damage in Laminated Composite Plates : The Patent Office Journal No. 46/2023/ Date of publication: 17-11-2023 : Date of publication: 17-11-2023 : The Patent Office, Govt. of India
  5. A design patent awarded on entitled: Portable milking machine : Design Patent No. 425105-001/ Date of publication: 29-07-2024: The Patent Office, Govt. of India
  1. Saritprava Sahoo, Pankaj Charan Jena, (2022) Damage Detection Using Recurrent Neural Network in Hybrid Composite Beam, Springer Book Series Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Chapter 10, DOI : 10.1007/978-981-19-6107-6
  2. B. B. V. L. Deepak · D. R. K. Parhi · B. B. Biswal · Pankaj C. Jena (Editors) 2022 Applications of Computational Methods in Manufacturing and Product Design Select Proceedings of IPDIMS, 2021 SCOPUS
  3. BBVL Deepak, Dayal R Parhi, Pankaj Charan Jena, (2020),Springer Book Series-Subtitle: Innovative Product Design and Intelligent Manufacturing System, Springer-Book Series-Lecture Notes in Mechanical Engineering, ISSN: 2195-4356, Springer Nature Singapore Pte Ltd. SCOPUS
  4. Basna Bidisha Bal, Sarada P. Parida, Pankaj Charan Jena, (2020), Damage Assessment of Beam Structure using Dynamic Parameters, in: Springer Book Series-Subtitle: Innovative Product Design and Intelligent Manufacturing System, Springer-Book Series-Lecture Notes in Mechanical Engineering, ISSN: 2195-4356, Springer Nature Singapore Pte Ltd. SCOPUS.
  5. Sarada P. Parida, Pankaj Charan Jena, (2020), Dynamic analysis of cracked FGM cantilever beam, in: Springer Book Series-Subtitle: Innovative Product Design and Intelligent Manufacturing System, Springer-Book Series-Lecture Notes in Mechanical Engineering, ISSN: 2195-4356, Springer Nature Singapore Pte Ltd. SCOPUS .
  6. Pradipta Kumar Rout, Pankaj Charan Jena, GirijaNandan Arka, B.surekha, (2020), Review on Magnesium Alloy Processing, , in: Springer Book Series-Subtitle: Innovative Product Design and Intelligent Manufacturing System, Springer-Book Series-Lecture Notes in Mechanical Engineering, ISSN: 2195-4356, Springer Nature Singapore Pte Ltd. SCOPUS.
  7. Pradipta Kumar Rout, Pankaj Charan Jena, B.surekha, (2020), Mechanical Characterization & Microstructural Study of Carbon Steel Welded Joint made under SMAW & GMAW processes, in: Springer Book Series-Subtitle: Innovative Product Design and Intelligent Manufacturing System, Springer-Book Series-Lecture Notes in Mechanical Engineering, ISSN: 2195-4356, Springer Nature Singapore Pte Ltd. SCOPUS.
  8. Barsarani Pradhan, Pankaj Charan Jena, D. Dhupal, (2019),Design, Development, and Optimization of Bio-Mechatronic Engineering Products: Chapter-10: Modeling and Numerical analysis of advanced Machining for Orthotic Components (300818-053554) In: Kaushik Kumar, J. Paulo Davim (eds.) Design, Development, and Optimization of Bio-Mechatronic Engineering Products. IGI Global, Chapter 6, ISBN: 9781522582359, 2019. SCOPUS
  9. Pankaj Charan Jena, Barsarani Pradhan, Sudhansu Ranjan Das, and D. Dhupal, (2019) Experimental Investigation on ECMM With Nimonic 75 Alloy for ProstheticComponent.In: Kaushik Kumar, J. Paulo Davim (eds.) Design, Development, and Optimization of Bio-Mechatronic Engineering Products. IGI Global, Chapter 6, ISBN: 9781522582359. SCOPUS
  10. Pankaj Charan Jena, (2019), Experimental and numerical analysis of Al–Cu sheets using hydraulic bulging process, In: Sustainable Engineering Products and Manufacturing Technologies, Chapter-3, Elsevier, https://doi.org/10.1016/B978-0-12-816564-5. 00006-2. SCOPUS.
  11. Pankaj Charan Jena, (2019), Design and analysis of heat exchanger by using computational fluid dynamics, In: Sustainable Engineering Products and Manufacturing Technologies,Chapter-6, Elsevier, 2019,https://doi.org/10.1016/B978-0-12-816564-5. 00006-2. SCOPUS
  12. Jena J., Panda A., Behera A.K., Jena P.C., Das S.R., Dhupal D. (2019) Modeling and Optimization of Surface Roughness in Hard Turning of AISI 4340 Steel with Coated Ceramic Tool. In: Chattopadhyay J., Singh R., Prakash O. (eds) Innovation in Materials Science and Engineering. Springer, Singapore, Chapter 15, ISBN:978-981-13-2116-0. SCOPUS.
  13. Pankaj Charan Jena, (2018), Crack analysis by using Fuzzy Logic, Neural Network & It’s Hybrid Tech, Book, Lambert Academic Publish, Europe, 2018,ISBN 978-613-9-87528-3.
  1. Organized (as Chairman) National Seminar on Recent Trends in Energy & Fuel Production Technology, RTEFPT-2024, 24-25 February, VSSUT, Burla.
  2. Organized (as Chairman) National Conference on Chemical & Bio-Science, NCCBS-2023, 25-26 March, VSSUT, Burla.
  3. Coordinator, One week, AICTE Sponsored STTP under AQIS Scheme on Advance of Materials Design, Machining and Characterization (AMDMC-2020), VSSUT, Burla21st to 26th November, 2020.
  4. Coordinator,One week, TEQIP-III Government of India Sponsored Faculty Development Programme on Advances in Materials & Machining processes for Recent Industrial Applications (AMMPRIA-2020) VSSUT, Burla 7th– 11thSeptember, 2020
  5. Coordinator, Two weekShort term course on “Functional Engineering Material: Technology, Modeling and Analysis (FEMTMA)”, AICTE- QIP-STC, VSSUT, Burla, 25th June to 7th July 2018.
  6. Convener, ENMAT-II (04.03.2016-05.03.2016) Orissa Engineering College, Bhubaneswar
  1. Hostel Warden (Pulah Hall of Residence) - From 18.02.2021 to 18.03.2023
  2. PIC-Telephone - From 23.09.2020 to Present
  3. Faculty Advisor "Production Engineering Society - From 20.09. 2019 to 20.01.2023
  4. PIC-Metal Forming & Material Testing Lab From 20.09.2019 to Till Date
  5. Head of Department, Chemical Engineering From 28.07.2022 to 01.07.2024
 

PATENTS PUBLISHED 02 Nos.

1.     An autonomous floor cleaning robot, (Application No. 202131023229A/ Date of publication: 18-06-2021, The Patent Office Journal No. 25/2021, The Patent Office, Govt. of India).

2.    Fluidized Hot Chamber for Abrasive Jet Machining, (Application No. 202031053304A, 05/02/2021, Certificate Serial No. 033121422, Patent No. 406529, The Patent Office, Govt. of India).

3.    Apparatus and Method for Assessing Structural Damage in Laminated Composite Plates. The Patent Office Journal No. 46/2023 Dated 17/11/2023, Govt. of India

4.    Apparatus for Testing Structural Damage in Laminated Composite Plates, Design Patent Awarded 161541, Dated 22-03-2024: The Patent Office, Govt. of India

 5.    Portable milking machine: Design Patent No. 425105-001/ Date of publication: 29-07-2024: The Patent Office, Govt. of India

 

Present Address : 
Department of Production Engineering, VSSUT, Burla, Sambalpur, Odisha, India, PIN:768018, Email: pcjena_pe@vssut.ac.in		   Permanent Address :